As a typical steel bar processing machine, the scope of use of steel bar cutting machines is very wide in the field of steel bar application in China. With the continuous strengthening of application, it is very important for application enterprises and frontline operators to be familiar with the requirements of usage standards. Therefore, today we will briefly discuss the operation preparation and requirements of steel bar cutting machines with Jietuo editor.

Firstly, for a high-quality steel bar cutting machine, the preparation before operation is to check whether the machine lubrication is good, whether the oil supply system is unobstructed, and whether the blade is intact, installed correctly, firm, and the gap is appropriate. In addition, it is necessary to check whether the protective facilities are complete and reliable, whether the electric machine is firmly connected, grounded, and whether the voltage matches. These are all necessary tasks.

Secondly, the requirements for the operation of the steel bar cutting machine include that the starting device of the machine should be located at a convenient location for the operator, and any changes should be adjusted in a timely manner. When cutting thin steel bars, the steel bars should be straightened without forming an arc. When cutting, the steel bars should be tightly held and when the movable blade is pushed back, the steel bars should be fed into the blade to prevent the end of the steel bars from swinging or jumping out and injuring people. Do not feed the steel bars into the blade when the movable blade is pushed forward to prevent machine or personal safety accidents.

In addition, if cracks, shrinkage, or severe bends are found in the steel bars during the cutting and batching process, they must be cut off. Experienced operators know that cutting steel beyond the specified range of machine performance and steel bars that exceed blade hardness or burn red is prohibited.

The above are the issues that need to be paid attention to when using the steel bar bending machine. If you want to learn more related knowledge, please feel free to consult us by hotline: 13819758083. Jietuo Electromechanical is a company specializing in the production and export of portable hydraulic electric steel bar quick breakers, steel bar cutting machines, steel bar bending machines, shear pliers and other tools. With years of production experience, we bring you the best steel bar processing machinery products and high-quality services, making you feel at ease when using them.